Filter By:
- Show More Brands
- Show Fewer Brands
Handlebars
$119.99
Inspired by the BMX bars of yesteryear
- 6061 T6 aluminum
- Shot peened and anodized black or silver
- The 22mm OD crossbar is not there just for strength, but allows installing accessories
$155.00
- Molded from multi-directional carbon/Kevlar weave for superior strength
- Integrated crossbar for exceptional stiffness
- Knurled stem clamp area for improved stem grip
- Rider weight limit: 135lbs
$99.99
All Box handlebars are engineered and crafted using our Oversized Technology. Handlebars have a dual purpose as they contribute to both steering and pedaling stiffness. By strategically varying wall thicknesses and tube diameters, we have moved material from 3 low-stress areas to zones of high load. This has greatly minimized twists and contributed to responsiveness. Concurrently we have increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar deflection and the consequences can lead to poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model handlebar is tailored for larger-sized racers and also takes our application of Oversized Technology one step further as it employs a tougher chromium molybdenum steel. This allows for a greater variation of wall thicknesses to combat the higher loads coming from that extra rider weight.
FEATURES
- Oversized™ Technology
- Chromoly Steel - Toughest Handlebar Material In • Lineup
- Massive Clamp Interface for Steering Stiffness
- 13 Butted - Variable Wall Thickness to Reduce Weight
$149.99
Ultra-lightweight Box One™ Carbon BMX Handlebars are made using advanced carbon fiber technology. Designed for maximum performance. Made for standard 22.2 bar bore stems.
FEATURES:
- 22.2 Bar Bore
- 3K Weave Carbon Fiber
- Gripper Clamping Area
- Impact-Resistant Clear Coat
- Water Decals
SPECIFICATIONS:
- 3 Inch 4.5 Inch 6 Inch
- Clamp (Ø) 22.2mm
- Material UD Carbon Fiber
- Sweep 6° back, 2° up 6° back, 2° up 7° back, 2° up
- Weight 166 grams / 5.9 ounces 204 grams / 7.2 ounces 288 grams / 10.2 ounces
- Width 21.5 inches 23.6 inches 26 inches
Please note, the maximum recommended rider weight for these bars is 100 pounds.
$20.99
- Traditional BMX handlebar design
- For single-bolt BMX stems
- Chrome-plated
- Clamp Size: 1-inch
- Width: 22.5-inch
- Rise: 6-inch
- Material: Steel
$22.99
- CW style
- Chrome-plated
- Clamp Size: 7/8-inch
- Width: 26-inch
- Rise 8-inch
- Type: BMX
- Material: Steel
$26.99
- Clamp Size: 7/8-inch
- Width: 27.5-inch
- Rise/Reach: 8.25-inch
- Type: BMX
- Material: Steel
$47.99
- Low-rise Black Ops chromoly BMX handle bar
- 30-inch width with a 6-inch rise - Wide and low
- Clamp Size: 22.2mm
- Material: Chromoly
$51.99
- Oversized BMX style cruiser bars perfect for wheelie bikes
- Durable chromoly construction with TIG-welded crossbar
- 22.2mm clamp and grip area
- Width: 31.5-inch
- Rise/Reach: 7-inch
- Upsweep: 1°
- Back Sweep: 10°
- Material: Chromoly
$59.99
- Butted full chromoly construction
- Lightweight design
- Clamp Size: 7/8-inch
- Width: 27.1-inch
- Rise/Reach: 8.25-inch
- Upsweep/Drop: 3°
- Material: Chromoly
$157.99
Burgtec's first range of signature handlebars developed with, yes you've guessed it! Josh Bryceland.
Josh loved the sweep and rise of the Ride Wide Bars but asked us to make him something a bit higher. The Rat isn't one of those guys that's 'crazy' on setup, but he knows what he wants.
- 38MM RISE:
Back in 2018 Josh's idea was for something more versatile that he could use on all his bikes. After testing various prototypes, he finally narrowed it down to a 38mm rise bar, the perfect sweet spot. The first material thought was Carbon but after getting to ride various Alloy prototypes he just got more comfortable on Alloy.
So, the 38mm "Ride High" was born. The same unsurpassed comfort and durability as all of the Ride Wide range, but just a little Higher.
- 50MM RISE:
It's fair to say high rise bars have taken a back seat over the last decade much in part to the increasing wheel sizes pushing up front ends of bikes and riders trying to match their previous riding positions.
After first coming to us a little over 3 years ago and deciding on the 38mm rise bar Josh wanted to quite literally raise the bar once again.
We'd previously prototyped the 50mm bar alongside the 38s but at the time just felt they looked out of place. With more riders moving towards 29ers we felt the market just wasn't ready for them.
Josh quickly adapted to the 38s but still felt he was running a lot of stack on his bikes. So with more frequency, he was popping in to Burgtec HQ asking if we had any of the 50mm rise bars left.
In the end, we ran out of prototype bars, and Rats a very persuasive guy so we just decided to go into production with the 50s.
For Josh, he loves how the higher rise allows for more maneuverability as well as getting rid of the excess stack height.
Plus, being a taller rider, they keep his weight where he wants it and freely admits "It's easier on my back".
The bars are a natural fit for Jump bikes but as Josh and the boys show they are equally at home on bigger travel trail bikes too.
- Width: 800mm
- Rise: 38mm, 50mm
- Available in 35mm clamp only.
- Backsweep: 9°
- Upsweep: 5°
- Weight: 38mm Rise = 346g, 50mm Rise = 391g
$90.00
Intended for dirt jumping, and your trail or DH bike if you need the extra rise.
$94.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar
- Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars
$98.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar
- Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars
$99.00
- The original Chromag bar
- Used from XC to DH, the OSX is Chromag's most versatile option
- 31.8mm clamp
Specs:
- Rise: 25mm
- Handlebar Width: 800mm
- Stem Clamp Diameter: 31.8mm
- Handlebar Material: Aluminum
- Upsweep: 5 degrees
- Backsweep: 8 degrees
$181.00
All Mountain / XC The Cutlass bar crosses categories from XC to Enduro with a 31.8mm diameter and width of 780mm. 220g of premium quality unidirectional carbon fiber ensures that this bar is about reliable strength and durability with a responsive feel. It features a 25mm rise for aggressive rider position tuned with a 5° upsweep, 8° bend orientation. The geometry of this bar now matches our OSX perfectly.
$200.00
- Unidirectional carbon fiber riser bar with 35mm stem clamp area
- Downhill strength with 25% weight savings compared to aluminum
$46.99
- Designed for riders who are looking for a more comfortable position or ride more aggressively in the drops
- 6061 T6 aluminum with shallow drop PPA and ergonomic top
- Matte black anodized
- 330g @ 42cm: all measurements are center-to-center
$54.00
- Narrow profile, fixie-riser bar with an oversized clamping area
- 6061-T6 aluminum alloy construction
- 53cm width with graduation marks to 38cm to ensure accurate cutting
$54.99
- 10-degree flare and a wide flat top for comfort and control
- 6061 T6 butted aluminum
- 310g (42cm)
$59.99
30-degree accentuated drop flare that allows for excellent control while riding off-road
- Provides additional space for bar bags
- 6061 T6 butted aluminum, 310g
$79.99
- Double butted 6061-T6 aluminum handlebar for track use\n
- Anodized and shot peened finish
- 330g @ 42cm: all measurements are center-to-center
$89.99
Classic Cinelli Road bars with a milky silver anodized finish
- 6061 T6 aluminum alloy construction with center sizing sleeve
- 290 grams @ 40cm: all measurements are center-to-center
$89.99
Classic Cinelli Criterium bars with a milky silver anodized finish
- 6061 T6 aluminum alloy construction with center sizing sleeve
- 280 grams @ 40cm: all measurements are center-to-center
$119.99
- 6061 T6 butted aluminum with a flattened ergonomic shape on the bar tops
- 320g (42 cm)
$169.99
- Hydroformed controlled thickness 6061-T6 aluminum alloy construction
- 31.8mm oversized clamping area with 25mm on each side of clamping area designed to accept clip-on aerobar extensions
- 40cm width (c-c): 290g
Page 1 of 13
Next page