Filter By:
- Show More Brands
- Show Fewer Brands
Handlebars
$24.99 - $32.99
This mid-rise handlebar provides smooth lines and pure comfort
- Black powder coat
- 1"(25.4mm) clamp, 5.25" rise, 27" wide
- Handmade in Maysville, Kentucky
$35.99
- Big brother to the #869 handlebars
- These are veritable pillars of chrome
- 1"(25.4mm) clamp, 13" rise, 24.5" wide
- Handmade in Maysville, Kentucky
$24.99
This classic touring handlebar is great for bicycle restorations or for adding a touch of traditional class to any bike
- 1"(25.4mm) clamp, 2.5" rise, 23.75" wide
- Handmade in Maysville, Kentucky
$28.99
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable.
- Chrome finish
- Made in the USA
- Weight: 372g
- Lever Compatability: Mountain 22.2mm
$24.99
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable.
- Made in the USA
- Chrome finish
- Weight: 526g
- Lever Compatability: Mountain 22.2mm
$30.99
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable.
- Chrome finish
- Made in the USA
- Weight: 862g
- Lever Compatibility: Mountain 22.2mm
$29.99
- 1"(25.4mm) clamp, 10.4" Rise, 23.5" Width
- Handmade in Maysville, Kentucky
$53.00
Vision Team clip on aerobars are fixed extensions with adjustable length.
- For 31.8mm base bar
- Material: Alloy
- Color: black
- Length: 230-270
- Defined Color: Black
- Weight: 464
$87.80
- Aero alloy construction with flattened top and aerodynamic integrated cable routing
- 10 deg forward angle for a more natural wrist position, with 4 deg outward bend placing the drops 10mm wider than at the hoods
- Shot peen black anodized finish
- Width measured center to center
- 310g (42cm)
$62.10
- Custom shaped for optimized aerodynamics
- Zero degree flat wing with internal cable routing
- Fits most standard 31.8mm clip-on aero extension
- UCI legal. 237g
$55.00
For all the off-road drop bar fans, Velo Orange offers the Far Bar, an affordable off-road drop bar. With off-road drop bars, most riders have the bars set up at the same height as they would have flat bars set to. Most of the time you are riding, your hands are on the hoods of the brake levers. Then, for steep descents, put your butt back behind the saddle and use the drops to get a better grip on the brake levers. You can run brifters or standard road brake levers on them and use bar end shifters as well.
The Daija Cycleworks crest appears on each side of the 31.8 mm clamp area.
These bars are a little different then road bars in terms of measuring the width. The listed width - 44cm or 48 cm - is measured center of the drops to centre of the hoods. The overall width is 585mm for the 44cm size, 625mm for the 48cm size.
- Weight: 292g
- Drop: 110mm
- Drop Bend Style: Compact
- Reach: 76mm
- Material: Aluminum
- Bar Top Style: Round
$42.00
A casual riding handlebar designed so the grips flare out a bit
22.2mm (MTB size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size
$42.00
A casual riding handlebar designed so the grips flare out a bit.
23.8mm (road-size) bars accept standard inverse brake levers, standard bar-end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters
$35.00
Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too.
The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy.
Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
$42.00
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars.
They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm.
The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes.
These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both):
- 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size.
- 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
$35.00
Velo Orange's Tourist bar is a "North Road" style bar rendered in polished aluminum alloy. It's similar to the bars used on many classic British roadsters.
The clamp area is 25.4mm in diameter. The width is 570mm and the reach is 180mm; it has about 70mm of rise. They sweep back about 60-degrees, and the grip area is about 160mm long.
The Tourist accepts regular MTB (22.2mm) grips, brakes, and shifters, but not inverse levers or bar-end shifters.
$409.00
- Ideal handlebar for road and gravel applications
- Flat section on the top makes it a comfortable bar for long days in the saddle
- Cable routing for the integration of a Di2 bar-end junction box
- 198g (42cm)
- Maximum rider weight of 220lbs
$75.00
Atmos is our new premium offering for cross-country performance. The Atmos 7k flat bar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 30mm per side allowing you to customize the bar to your preferred width. This bar is made of lightweight 7050 aluminum.
- 760mm width
- 250g at full width
- 7050 aluminum
- Wide to start and trimmable by 30mm each side
SPECIFICATIONS
- Type: Flat
- Application: XC
- Clamp Diameter: 31.8mm
- Backsweep (degrees): 9
$75.00
The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width.
- 760mm wide
- Wide to start and trimmable by 30mm each side
- Made from tough 7050 lightweight aluminum
SPECIFICATIONS
- Type: Riser
- Application: XC
- Clamp Diameter: 31.8mm
- Width: 760mm
- Backsweep (degrees): 9
$183.00
Atmos is our new premium offering for cross-country performance. The Atmos carbon flat bar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 40mm per side allowing you to customize the bar to your preferred width. This is the lightest bar in the Atmos range.
- Wide to start and trimmable by 40mm each side
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
- 190g at full width
SPECIFICATIONS
- Type: Flat
- Application: XC
- Clamp Diameter: 31.8mm
- Width: 760mm
- Backsweep (degrees): 9
$99.99
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface.
- Upsweep: 5°
- Backsweep: 9° (760mm bars)
- Backsweep: 7° (all other bars)
$194.00
On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day.
- Available in 760mm carbon with 20mm rise
- 35mm clamp
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
SPECIFICATIONS
- Type: Riser
- Clamp Diameter: 35.0mm
- Width: 760mm
- Rise: 20mm
- Backsweep (degrees): 7
$194.00
RIP, NO RATTLE.
Arm fatigue is real. The solution? More muscle. Or, our new carbon laminate, made to tackle the trail buzz, not transfer it. We re-engineered our bars to improve rider position (adding 5mm rise) and reduce the chatter transferred to the hands and arms. These bars offer the right bit of flex while keeping things stiff, precise, and responsive.
Features:
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
Specifications:
- Clamp Diameter: 35.0mm
- Width: 800mm
- Material (HB): Carbon
- Rise (HB): 25mm
- Type (bar): Riser
- Backsweep (degrees): 9
- Upsweep (degree): 5
$75.00
Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control.
- Stiff, precise, and super-wide
- Made with tough 7050 alloy
- Descendant geometry from TruVativ's best enduro rider’s input
- Backsweep: 7°
- Upsweep: 5°
$161.00
Uncompromising control and unflinching style. Based on the width of Enduro superstar Jerome Clementz, the Descendant carbon flat bars bring comfort and control to riders seeking the aggressive position a flat bar offers. Descendant series bars are the new benchmark for control and comfort.
- Material: Carbon fiber
- Width: 750mm
- Backsweep: 7-degrees
- Bar Clamp Diameter: 31.8mm
- Colors: Black
$200.00
Proven shape, proven width, proven materials, and the artistic touch of Troy Lee Designs: voilà, the TRUVATIV CoLab TLD Carbon riser bars. These bars are stiff, tough, dependable, and give you all the comfort and positive steering feel you want. This is art on your bars for artistry in the corners.
- Stiff, precise, and width-optimized for enduro, trail and aggressive xc
- Carbon fiber perfection
- DESCENDANT geometry from their best enduro rider’s input
- Signature Troy Lee Designs style
$75.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control.
- Material: Al-7050
- Width: 800mm
- Backsweep: 9-degrees
- Rise: 25mm
- Upsweep: 5-degrees
- Colors: Black
$194.00
It's Stiff, Not A Stiff.
It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter.
Features
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
Specifications:
- Clamp Diameter: 31.8mm
- Width: 760mm
- Material (HB): Carbon
- Rise (HB): 20mm
- Type (bar): Riser
- Upsweep (degree): 5
$194.00
It's Stiff, Not A Stiff.
It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter.
Features:
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
Specifications:
- Clamp Diameter: 31.8mm
- Width: 760mm, 800mm
- Material (HB): Carbon
- Rise (HB: 25mm
- Type (bar): Riser
- Upsweep (degree): 5
$70.00
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control.
- Material: Al-7050
- Width: 760mm
- Backsweep: 7-degrees
- Rise: 20mm
- Upsweep: 5-degrees
- Colors: Black